AJ-250 PCB Separator

The machine is pneumatically driven and electric control. Build in 7 digits counter that convenient for counting the cuts.

The straight knife type depaneling machines were designed to depanel prescored panelboards carefully, without bending or tension stress. Even sensitive SMD-components like ceramic capacitors will not be damaged by the depaneling process.

Due to the special design of the knives also boards with high components placed close to the edges can be depaneled safely. Based on a proven method of depaneling, wedge-shaped knives are used to cut the panels within the groove. This enables boards of less than 1 mm thickness to be separated safely and without creating stress.

Features

1. No vibration during the process to prevent damage to precise PCB

2. Build in 7 digits counter that convenient for counting the cuts

3. Gap for insertion of the board can easily be adjusted by means of the adjusting knob in the top side of the machine, low friction design is applied.

4. Lower knife height adjustable, the front and real portion can be adjusted separately. No thin plates are required after resharpening the knife. 

5. Operation and maintenance can be done also by unskilled personnel

Specification:

Power Voltage: 90~240VAC
Air pressure: 5Kgs/cm² 
Effective length： 250mm,
PCB thickness: 0.1~2.0(V-grooved PCB)
                        0.1~1mm (Without V-cut)
Weight: